Brake Caliper Piston Rewind Tool, Car Rear Brake Pad Wind Back Tool, Right Handle Set Brake Caliper Compression Tool, Brake Piston Wind Back Tool for Replacement of Rear Brake Pad

This car rear brake pad retracting tool can efficiently remove and install brake pads with return air piston calipers, helping users to quickly complete the maintenance of vehicle brake systems.SPECIFICATION:Brand: UHANBUTName: Brake Caliper Piston Rewind ToolColor: Black+SilverMaterial: Chromium Vanadium SteelSIZE:Brake Caliper Tool Length: 5.67 inchRetaining Plate Length: 3.62 inchDisc Adapter Diameter: 1.61 inchApplicable: Most vehiclesFEATURES:-This caliper compression tool has a compact overall design and is easy to store in the car glove box or trunk, which is convenient for access at any time to meet maintenance needs.-The use of this car brake caliper piston winding tool only requires three steps: removing the wheel, aligning the groove, and rotating the handle. Novices can also operate it easily.-This disc brake piston caliper adopts the design of a thickened top plate, smooth thread, and a double-sided double-tooth chuck to enhance the practicality and ease of operation of the tool.

• 【High-Quality Material】:The disc brake piston caliper is made of high-quality chromium-vanadium steel, which has the characteristics of high hardness, strong toughness, wear resistance, not easy to be damaged, and long service life. It is reliable and practical and is a must-have tool in your car toolbox.
• 【Product Specification】:The car brake caliper piston winding tool comes with a 2-in-1 disc adapter, the two sizes of gaps between pins on the sides of the chuck head are 16mm and 25.5mm, and the pin head diameter is 9mm. Compact structure, easy to carry and store, can be placed in the car glove box/trunk, convenient for you to use anytime and anywhere.
• 【Easy to Use】:The car rear brake pad retracting tool has retracting pistons on the left and right threaded piston calipers, making it easy to operate. First, remove the required wheel; secondly, after placing the retaining plate on the brake tool, use the chuck of the caliper piston tool to align the groove; then, rotate the handle of the brake caliper piston tool and compress the brake distribution pump Piston, install the brake pads onto your car.
• 【Applicable】:The caliper compression tool is suitable for most cars with right-hand threads and is suitable for installing brake pads with air return piston calipers. When you get a brake caliper piston tool, you can get a lot more done with it.
• 【Cautions】:If the brake pad is rusty and cannot be tightened, please do not tighten it with external force. This will damage the tool. Please remove the rust first and then use it with the brake caliper piston rewinding tool.